Fujitsu ASU18RLF Design & Technical Manual

4. For confirming the custom code, press the TIMER MODE button to send the code to the indoor
unit.
2 short beeps
5. Press the MODE button to enter the function setting mode.
6. Select the function number by pressing the or the button.
Each time the MODE button is pressed, it switches between the left digit and the right digit.
Change digit
7. Proceed to number setting by pressing the FAN button.
To return to the function number selection, press the FAN button again.
8.
Select the setting number by pressing the or the button.
Each time the MODE button is pressed, it switches between the left digit and the right digit.
Change digit
- 131 -
14-2. Indoor unit (setting by wireless remote controller) 14. Function settings
MULTI TYPE 2, 3, 4 ROOMS TYPE MULTI TYPE 2, 3, 4 ROOMS TYPE

Fujitsu ASU18RLF Specifications

General

Brand	Fujitsu
Model	ASU18RLF
Category	Air Conditioner
Language	English