1-3. Switching the temperature unit of remote controller
Displayed temperature unit on the remote controller LCD can be switched between °F (Fahrenheit)
and °C (Celsius).
To change temperature unit, do as follows:
1. Press the TEMP. (Up) button (
) for at least 5 seconds to display the current temperature unit.
(Factory setting: °F)
2. Press the TEMP. (
) ( ) buttons to switch the temperature unit between °F and °C.
3. →ith either of pressing the START/STOP button or no additional button operation for 30 sec-
onds in step 2., the temperature unit currently selected will be set.
1-3. Switching the temperature unit of remote controller - (05-11) - 1. Function settings
FIELD
WORKING
FIELD
WORKING
To Next Page
Loading...
