Fujitsu ASYA09LGC Service Instruction

2. HEATING OPERATION
2-1 HEATING CAPACITY CONTROL
A sensor (room temperature thermistor) built in the indoor unit body will usually perceive
difference or variation between a set temperature and present room temperature, and
controls the operation frequency of the compressor.
* If the room temperature is lower by 3°C than a set temperature, the compressor operation
frequency will attain to maximum performance.
* If the room temperature is higher 2.5°C than a set temperatire, the compressor will be
stopped.
* When the room temperature is between +2.5°C to -3°C of the setting temperature,
the compressor frequency is controlled within the range shown in Table2.
However, the maximum frequency is limited in the range shown in Figure 2 based on the
fan speed mode and the outdoor temperature.
( Table 2 : Compressor Frequency Range )
( Fig.2 : Limit of Maximum Frequency based on Outdoor Temperature )
* The room temperature is controlled 2°C higher than the setting temperature for 60 minutes
after starting the operation.
After 60 minutes, it is controlled based on the normal setting temperature.
05-02
minimum
frequency
maximum
frequency
AS*A07/ 09LGC 22Hz 99Hz
AS*A12LGC
18Hz 130Hz
AS*A14LGC
18Hz 101Hz
Hi Me+ Lo Quiet
AA zone
99Hz 99Hz 79Hz 67Hz
A zone
99Hz 99Hz 79Hz 67Hz
B zone
99Hz 99Hz 79Hz 56Hz
07LGC
09LGC
C zone
AA zone
A zone
B zone
C zone
99Hz 99Hz 79Hz 46Hz
130Hz 130Hz 80Hz 68Hz
130Hz 130Hz 80Hz 68Hz
130Hz 130Hz 80Hz 54Hz
130Hz 130Hz
Me
96Hz
96Hz
96Hz
96Hz
96Hz
96Hz
96Hz
96Hz 80Hz 45Hz
AA zone
A zone
B zone
C zone
101Hz 101Hz 58Hz 45Hz
101Hz 101Hz 58Hz 45Hz
101Hz 101Hz 58Hz 38Hz
101Hz 101Hz
75Hz
75Hz
75Hz
75Hz 58Hz 30Hz
12LGC
14LGC
Outside air Outside air
temperature temperature
19°C
C zone
B zone
A zone
AA zone
17°C
14°C
12°C
7°C
5°C

Fujitsu ASYA09LGC Specifications

General

Brand	Fujitsu
Model	ASYA09LGC
Category	Air Conditioner
Language	English