- 25 -
WALL MOUNTED
ASYG09-14LZCA
When function setting is “Forced stop” mode
When function setting is "Operation/Stop" mode 2
NOTE: When "Operation/Stop" mode 2 function is used with forming a remote controller group,
connect the same equipment to each indoor unit within the group.
Optional part
* For operating the external function, the wall mounted type requires the communication kit in
addition to the wire (UTY-XWZXZ5).
Part name Model name Exterior
External connect kit UTY-XWZXZ5
External input wire
Communication kit UTY-TWBXF1