Fujitsu D3031 - Features; System Board Overview

D3031 (RX200 S6) Technical Manual 17
3 Features
I Not all features of the system board might be used in your server system.
3.1 Overview
Processors
– 2 processor sockets LGA1366
– 1 or 2 Intel
®
Dual or Quad-Core or LV processors of the Nehalem-EP line
with
– power consumption up to 95 W
– quick path interconnects (QPI)
– integrated memory controller
or
– 1 or 2 Intel
®
Quad or Six-Core processors of the Westmere-EP line with
– power consumption up to 130 W
– quick path interconnects (QPI)
– integrated memory controller
Main memory
– 12 slots for main memory; each CPU supports 3 channels with 2 DIMM slots
– UDIMM (unbuffered DIMM) or RDIMM (registered DIMM) memory modules:
– capacity UDIMMs: 2 GB
– capacities RDIMMs: 2 GB, 4 GB, 8 GB or 16 GB
– LV-DIMM (low voltage DIMM) memory modules, support with Westmere-EP
processors only
– minimum memory configuration: one DIMM with independent channel mode
– maximum 192 GB (with RDIMMs) or 24 GB (with UDIMMs) of memory
– ECC multiple bit error detection and single bit error correction
– memory scrubbing function
– Single Device Data Correction (SDDC) function (Chipkill™), only with
RDIMMs
– memory mirroring function
– memory sparing function