Fujitsu D3031 - Switch Settings

36 Technical Manual D3031 (RX200 S6)
Settings Features
3.7.2 Switches
I Default setting: switches 1 to 4 are set to Off.
Switches Function Status Description
S1-1 BIOS recovery On Boot block enabled
Off Normal boot
S1-2 Skip BIOS
password query
On Password disabled
Off Password enabled
S1-3 BIOS write-
protect
On BIOS can only be read
Off BIOS can both be read
and written to
S1-4 CMOS clear
(software)
On Clear CMOS settings
and restore system
defaults
Off Normal CMOS settings