Fujitsu D3031 - Settings and Configuration; Jumper Settings

34 Technical Manual D3031 (RX200 S6)
Settings Features
3.7 Settings
Figure 9: Jumpers and switches
3.7.1 Jumpers
I The default setting for all jumpers is position 1-2.
Clear CMOS jumper - JP2
Jumper Pos. Description
1-2 Normal, not clear CMOS settings (default setting).
2-3 Clear CMOS settings and restore default values
(hardware).
S1
Front VGA
Slot 2
Slot 1
UFM
SATA1
Slot 3
PWR CTRL
CPU 1
JP5
Battery
DIMM 1C
DIMM 2C
DIMM 1B
DIMM 2B
DIMM 1A
DIMM 2A
JP2
iRMC