Fujitsu D3031 - Page 19

D3031 (RX200 S6) Technical Manual 19
Features Overview
Power management
– ACPI (states S0, S1, S5)
– 3.3 V standby power on the PCI Express slots
– on/off/sleep/wake by power button
– on/off by software
– wake on by RTC, external serial connector, LAN, PCI Express controller and
iRMC S2
– power on by power button, external serial connector, LAN, PCI Express
controller and iRMC S2
BIOS features
– Phoenix SecureCore
TM
Server BIOS, version 6.0
– SMBIOS 2.50 (DMI)
– MultiProcessor Specification 1.4
– Server Hardware Design Guide 3.0
– WfM 2.0
– IPMI V2.0
– ACPI 3.0b support
– USB keyboard/mouse
– boot possible from:
– CD-ROM
– USB drive
– LAN (PXE and iSCSI)
– console redirection support
– OEM logo
– CPU, memory disable
– memory mirroring and memory sparing support
Environmental protection
Battery in holder for recycling
Form factor
290 x 485 mm
CSS (Customer Self Service)
This system board supports the CSS functionality. You will find a description of
CSS functionality in the operating manual of your server.