Fujitsu D3162-B - D3162-B: Temperature Sensors and Fan Connectors

a
g
e
2
Page
TechNotes D3162-B V1.0 Page 22 of 45 www.ts.fujitsu.com/mainboards
System Monitoring
4.1 D3162-B: Temperature Sensors and Fan Connectors
PSU Fan Control
Processor (Fan1; 4 pin PWM)
Sensor “Memory”
Sensor “CoreRegulator”
Fan 2 (4 pin PWM)
Fan 3 (4 pin PWM)
Sensor “PCIe Graphics”
(not yet available in
SystemGuard)
Note: Do not attach more than one fan per connector!
Remove or connect fans only when unit is powered off!
Sensor “Super I/O”
Sensor “Processor”