Brief description of mainbo ard Engl
ish - 3
Brief description of m ainboar
d
Information about boards
Be sure to observe the following for bo ards with ESD:
• You must always discharge static build up (e.g. by touching a grounded object)
before working with the board.
• The equipment and tools you use must be free of static charge.
• Remove the power plug from the mains supply before inserting or removing
boards.
• Always hold boards by their edges.
• Never touch connector pins or conductors on the board.
An ove rview of the fe atures is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the c on figuration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
Fujitsu 17
To Next Page
Loading...
