Getting started
Connecting the monitor
Connect the monitor to your device only if it is switched o ff.
► Follow the instructions contained in the monitor operating manual to prepare
the monitor (e.g. connecting cables).
Monitor
► Plug the data cable into t he desired monitor port of the device.
► Plug the m onitor power cable into the grounded mains outlet.
Connecting a USB mou se
► Connect the USB mouse to one of the USB ports on the device.
Connectinga USBmouseUSBport
Connecting a USB keyb
oard
Use th e keyboard cable provided with the keyboard (no t included in the delivery scope of the device).
USBportconnecting
► Plug the rectangular connector of the keyboard cable into the rectangular socket
on the underside or on the rear of the keyboard.
► Plug the flat rectan
gular USB connector of the keyboard cable into a USB port of the de vice.
USBport
Connecting external devices to the serial interface
SerialinterfaceSerialinterface,Externaldevices,Devices,
For an exa ct description of how to connect external devices to the corresponding
port, please see the external device documentation.
External devi
ces (e.g. a printer or scanner ) can be connected to the serial port.
► Connect the da
ta cable to the external device.
► Connect the data cable to the corresponding serial interf ace.
Port settin
gs
Serialinterface,
You can change the settings of the port in the BIOS Setup.
Device drivers
Devicedrive rs,
The d evices connected to the serial interface require drivers. Your operating system
already includes many drivers. If the required drive is missing, install it. The latest
drivers are usua lly available on the Internet or will be supplied on a data carrier.
36 Fujitsu
To Next Page
Loading...
