Operation
Using a locking slide
• The top casing cover has bee n removed (see "Removing the casing top cover", Page 66).
• The bottom casing cover has be en removed (see "
Removing and attaching
the botto m casing cover", Page 97).
You can also purchase a locking bracket for your device. Contact the service
desk or sales partner responsible for your cou ntry.
The following Figure illustrates the FUJITSU Desktop ESPRIMO Q956/Q957
device variant. In the FUJITSU Desktop ESPRIMO Q55x/Q958 variant, th e
concerned components are located in the same position.
You can use the pa dlock c
lamp located on the device and the locking bracket t o
protect your device fro
m unauthorised opening.
Fujitsu 53
To Next Page
Loading...
