System expansions
If y ou want to install a blanking cover
2
1
► Insert the metal cover (EMC protection) in the casing (1) and secure it with the screw (2).
3
► Fasten t
he blanking cover to the drive cage (3).
► If you do not want to remove or install any other componen ts, replace th e top casing
cover (refer to "
Securing the top casing cover", Page 67).
If you
want to install an optical drive
► Insert the optical drive and associated lead (see "Installing a drive", Page 71).
If y
ou want to install a SmartCard reader / palm sensor
► Install the SmartCard reader / palm sensor and associated cable (refer to
"
Installing the reader/sensor", Pa ge 86).
84 Fujitsu
To Next Page
Loading...
