System expansions
a
1
3
2
b
► Press and hold the unlocking mechanism (b) and carefully push the reader/sensor slightly in the
direction of the arrow (1) until the reader/sensor and casing contacts and cables are accessible.
Ensure that you do not pull strongly on attached leads.
► Fully feed the reader/sensor lead and plug (c) through the opening in the drive
cage (2) out of the interior of the casing.
► Lift the reader/sensor out of the drive bay (3).
c
4
4
d
► Detach the drive plate from the drive (c) as shown (4).
► Fasten the drive plate (d) to the d rive cage.
88 Fujitsu
To Next Page
Loading...
