Getting started
► Turn the device over and place it on a stable, flat and c lean surface. If necessary, place a
slip-resistant cloth on this surface to prevent the device from being scratched.
1
1
2
► Put the bottom cover as shown on the bo ttom of the device.
► Hook the bottom cover in the openings provided for this purpose at the botto m (1).
► Fold the cove r in the direction of the arrow (2) until it engages noticea bly and audibly.
Information about removing the bottom cover is provided in Section "
Remove the bottom cover",
Page 26.
Fujitsu 19
To Next Page
Loading...
