System expansio ns
If y ou w ant to in stall a blanking co ver
2
1
► Insert the metal cover ( EMC protection) in the casing (1) and secure it with the screw (2).
3
► Fasten t
he blanking cover to the drive cage (3).
► If you do not want to remove or install any ot her components, replace the top casing
cover (refer to "
Securing the top casing cover", Page 67).
If you
want to install a SmartCard rea d e r / palm sens or
► Install the SmartCard reader / palm sensor and associated cable (refer to
"
Installing the reader/sensor", Pa ge 86).
If y
ou want to install a second hard disk
► Install the second hard disk and the associated ca ble (refer to "Installing a hard disk", Page 78).
Fujitsu 75
To Next Page
Loading...
