Fujitsu ESPRIMO Q957 - Open the Service Cover; Removing Memory Modules

System expansio ns
Open the service cover
2
1
► Slide the clip in the direction of the arrow (1) and hold it tight.
► Pull the cover off from the casing at the tab in the direction of the arrow (2).
Removing memory modules
3
2
1
1
► Carefully push the two retaining clips outwards (1).
AddingmemoryMemorymodule

The memory module will fold upwards (2).
► Pull the memory m odu le out of its slot in the direction of the arrow (3).
Fujitsu 99