Getting started
Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before con necting external devices!
Do not connect or disconnect cables d uring a thunderstorm.
Always hold the plug of a ca ble when removing it. Never unplug a
cable by pulling the cable itself.
To ensure that your device works properly, use only the connection cable
supplied or use a high-quality connection cable.
Ports on the device
PortsExternaldevicesDevice
The ports are located on the front and ba ck of the device. The ports available on your
device depe nd on the config uration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the connections is provided in the m anual for the motherboard.
DVI-D monitor port, white
Monitorport
DP Display port
Serial port
Serialport
LAN port
LANport
USB 2.0 - Universal Serial
Bus, type A, black
UniversalSerialBus
Audio input (Line in)
USB 3 .1 Gen1 - Univers al
Serial Bus, Type A: blue, Type
C: black
UniversalSerialBus
Audio output (Line O ut), light green
AudiooutputLineout
USB 3 .1 Gen2 - Univers al
Serial Bus, type A: blue, type
C: black
PS/2 keyboard port, purple
Keyboardport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected d evice and Operating System).
Fujitsu 35
To Next Page
Loading...
