System expansio ns
2
► Slide the hard disk with the EasyChange rails fitted into the drive cage in the direction
of the arrow (2 ). Ensure that the label on the hard disk is facing upwards.
► Attach the leads to
the hard disk and onto the mot herboa rd (see
"
Removing the driv
e cage", Page 68).
You can find inform
ation on pin allocation on the motherboard in Section
"
Overvie w of the
installation openings an d drives in your device",
Page 62 and in your
motherboard manual.
► If you do not want to remove or install any other components, replace the drive cage
and the top casing cover (see "
Installing t he drive cage", Page 69 and "Securing the
top casi ng cover", Page 67). Take care that no cables get jammed.
Fujitsu 91
To Next Page
Loading...
