|Host interface cards |
Controller canister Cam handle
The following figure is an example of an HB5200 controller shelf:
Controller canister Cam handle
4. Move the cam handle to the left to lock the controller canister in place.
5. Reconnect all the cables you removed.
Attention: Do not connect data cables to the new HIC ports at this time.
6. (Optional) If you are upgrading HICs in a duplex configuration, repeat all steps to remove the other
controller canister, remove the HIC, install the new HIC, and replace the second controller canister.
What to do next
Go to Complete upgrading a host interface card.
80
To Next Page
Loading...
