|Host interface cards |
Controller canister Cam handle
The following figure is an example of an HB5200 controller shelf:
Controller canister Cam handle
3. Move the cam handle to the left to lock the controller canister in place.
4. Reconnect all the cables you removed.
Attention: Do not connect data cables to the new HIC ports at this time.
5. (Optional) If you are adding HICs to a duplex configuration, repeat all steps to remove the second
controller canister, install the second HIC, and reinstall the second controller canister.
What to do next
Go to Place controller online (duplex).
88
To Next Page
Loading...
