Fujitsu ETERNUS AB Series - Page 98

|Host port protocol|
Starting configuration Ending configuration
Controller
submodel
ID
Baseboard
ports
HIC ports Controller
submodel
ID
Baseboard
ports
HIC ports
Feature Activation Code
365 FC iSER SGF-SVB-ZWU9M
366 FC SRP 7GH-CVB-ZYBGV
367 iSCSI iSER 6GK-VVB-ZZSRN
368 iSCSI SRP RGM-FWB-Z195H
384 Not
Available
NVMe/IB
405 Not
Available
NVMe/
RoCE or
NVMe/FC
VGM-NKK-ZDLDK
365 FC iSER GG5-8WB-ZBKEM
366 FC SRP KG7-RWB-ZC2RZ
367 iSCSI iSER NGC-VWB-ZFZEN
368 iSCSI SRP 4GE-FWB-ZGGQJ
385 Not
Available
NVMe/IB
405 Not
Available
NVMe/
RoCE or
NVMe/FC
NG1-WKK-ZLFAI
365 FC iSER MG6-ZKK-ZNDVC
366 FC SRP WG9-JKK-ZPUAR
367 iSCSI iSER NGE-MKK-ZRSW9
368 iSCSI SRP TGG-6KK-ZT9BU
384 Not
Available
NVMe/IB AGB-3KK-ZQBLR
405 Not
Available
NVMe/
RoCE or
NVMe/FC
385 Not
Available
NVMe/IB JGJ-PKK-ZUQG2
Note: If your controller submodel ID is not listed, contact Fujitsu Support.
4. In System Manager, locate the Feature Enable Identifier.
a) Go to Settings > System.
b) Scroll down to Add-ons.
c) Under Change Feature Pack, locate the Feature Enable Identifier.
d) Copy and paste this 32-digit number to a text file.
98