Fujitsu ETERNUS AF250 - Figure 15 Iscsi 10 Gbit;S (10 GBASE-T) Interface (Installed in a Controller)

● iSCSI 10Gbit/s (10GBASE-T)
The ports on the host interface are used to connect LAN cables. This port uses an RJ-45 connector.
Figure 15 iSCSI 10Gbit/s (10GBASE-T) Interface (Installed in a Controller)
1
2
3
4
5
6
1. Host interface (CA#0)
2. Host interface port (CA#0, Port#0)
3. Host interface port (CA#0, Port#1)
4. Host interface (CA#1)
5. Host interface port (CA#1, Port#0)
6. Host interface port (CA#1, Port#1)
1. Component Names and LED Names
Controller Enclosures
20
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0