■
About Shock
•
Do not lay the drives directly on a desk or similar hard surface. Always use a rubber
mat or other soft material to cushion the drives against physical shocks.
•
Do not stack drives or stand drives on end.
•
Do not apply external force to the interface connectors.
•
Do not knock or drop the drives on hard objects.
Additional Drive Installation Procedure
This section explains how to install optional drives in the ETERNUS AF.
Drives can be installed in any slots.
•
If components are installed in a way other as described in this section, damage and/or
device failure or electrical shock may occur.
•
Do not install drives that are for use in other devices.
1 In the [Storage] screen of [Component] on the ETERNUS Web GUI screen, check that all components of the
ETERNUS AF
are in normal status.
2 Wear a wrist strap or touch a metal part to discharge the human body's natural static electricity.
5. Component Expansion/Function Enhancement
Installing Additional Drives
49
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
