3 Remove the dummy drive unit from the slot in which the drive is to be installed.
Push into the tab of the dummy drive unit and pull it straight out of the drive slot.
Keep the removed dummy drive units in a safe place where they will not be lost.
4 Install the new drive.
(1) Press the catch on the drive lock lever to unlock it.
(2) Insert the drive all the way into the slot, making sure that it is firmly seated and that the lock lever is
still left open.
5. Component Expansion/Function Enhancement
Installing Additional Drives
50
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0
To Next Page
Loading...
