Fujitsu ETERNUS AF250 - Page 82

● LAN Card Replacement
The following procedure explains how to replace the LAN card.
1 Turn off the server where the LAN card is to be replaced.
2 Replace the LAN card.
For details on the replacement procedure, refer to the relevant documentation for the LAN card.
3 After completing the settings, confirm that access from the server is available.
7. Troubleshooting
Check List
82
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays
Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
P3AG-1842-06ENZ0