Fujitsu ETERNUS AF650 S2 - Page 16

Safety Precautions
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Copyright 2019 FUJITSU LIMITED P3AM-8012-14ENZ0
16
WARNING
Do Not
• Do not insert or drop foreign objects such as metals or flammable objects into
openings in the power synchronized unit such as air vents. Doing so may cause
electric shock, fire, or device failure.
• Do not obstruct the openings in the power synchronized unit such as air vents.
Doing so may cause overheating that leads to fire and device failure.
• Do not use any flammable type cleaning sprays. Doing so may cause fire or device
failure.
Do
• Use only power sockets that have a ground. Failure to do so may cause electric
shock, fire, or malfunction.
• Disconnect the power plug from the socket during thunderstorms. Failure to do so
may lead to electric shock, fire, or device failure.
• Ensure the power plug is fully inserted into the socket. Failure to do so may cause
electric shock or fire.
• Install optional products for the power synchronized unit by following the instruc-
tions described in this manual. If an optional product is installed in any other way,
device failure or electric shock may occur.
Do Not Wet
• Do not pour or spill water on the power synchronized unit. Doing so may cause
electric shock, fire, or device failure.
Unplug
• When unplugging the power plug, do not pull on the cable, hold the plug. Pulling
the cable may expose or snap the inner wires, which can lead to electric shock or
fire.
• Use a dry cloth to remove all dust from plugs and sockets. Not doing so may cause
electric shock or fire.
• When the power synchronized unit is not used for a long period of time, unplug
all power plugs. Failure to do so may lead to fire.