Fujitsu ETERNUS AF650 S2 - Page 49

4. Connection and Settings
Turning on the Power Synchronized Unit
FUJITSU Storage ETERNUS AF, ETERNUS DX Configuration Guide (Power Synchronized Unit)
Copyright 2019 FUJITSU LIMITED P3AM-8012-14ENZ0
49
■ Procedure for powering on
The procedure for turning on a power synchronized unit is described below.
Procedure
1 Connect the power cord (for AC power input) to the power synchronized unit.
1-1 Connect the power plug of the power cord (for AC power input) to the AC IN port.
1-2 Attach the release tie to the plug of the power cord (for AC power input) to firmly fix the power plug to
ensure it does not become unplugged.
Unplug
• Use a dry cloth to remove all dust from plugs and power sockets. Not doing so may
cause electric shock or fire.
CAUTION
Ground
• Use only power sockets that have a ground. Failure to do so may cause electric
shock, fire, or malfunction.
AC IN port
Power cord (for AC power input)
Release tie