8 Check whether a file or other item can be created in the created drive.
■
SnapOPC+ Destination Settings
Set up the disk created in [Snap Data Volume].
1 During volume creation, right-click the disk created in [Snap Data Volume] and select [New Simple Vol-
ume].
Chapter 6
SAN Connection Settings
6.2 Server Connection Setup
114
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0
To Next Page
Loading...
