■
High-density Drive Enclosures
Figure 1.8 Rear View of a High-density Drive Enclosure
1. I/O module (IOM#0)
2. I/O module (IOM#1)
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
6. Power supply unit (PSU#1)
7. Power supply unit (PSU#2)
8. Power supply unit (PSU#3)
9. Fan expander module (FEM#0)
10. Fan expander module (FEM#1)
1.3 Power Distribution Units (for Regions Other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1 Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
Chapter 1
Component Names
1.3 Power Distribution Units (for Regions Other than EMEA&I)
23
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0