Fujitsu Eternus DX500 S3 - RAID Configuration Settings

3.5 RAID Configuration Settings
Use ETERNUS Web GUI to set RAID configurations in the ETERNUS DX.
Perform the following settings:
•
RAID group creation
•
Volume creation
•
Hot spare registration
This section describes the configuration settings using a case of creating the following volumes as an exam-
ple.
•
Operation volume
Create an operation volume (Standard) in RAID5(4+1) RAID group.
•
Backup volume
Create a generation management volume (SDV) and copy data destination volume (SDPV) in RAID5(2+1)
RAID group.
Chapter 3 General Settings
3.5 RAID Configuration Settings
49
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7732-05ENZ0