Fujitsu Eternus DX600 S3 - Page 100

Chapter 5 Host Interface Management
5.6 Create Host Affinity
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
100
9 Select whether to enable or disable the path between a host and a CA port.
The main setting item is as follows.
● CA Port Group
• Checkbox to select paths
10 Click the [OK] button.
11 Confirm the host affinity setting and the path between the host and the CA port, click the
[Create] button.
 A confirmation screen appears.