Chapter 5 Host Interface Management
5.7 Modify CA Reset Group
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
102
5.7 Modify CA Reset Group
A CA reset group groups ports which are released simultaneously under the instruction of a server.
All the ports are configured in one reset group in the initial setting. It is not necessary to change the setting
for normal use. For details on changing the CA reset group according to instructions in "FUJITSU Storage
ETERNUS DX Configuration Guide -Server Connection-", refer to "Modify CA Reset Group" in "ETERNUS Web GUI
User's Guide (Settings)".
To Next Page
Loading...
