Fujitsu Eternus DX600 S3 - Appendix C Estimated Advanced Copy Source Capacity

FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
126
Appendix C
Estimated Advanced Copy Source Capacity
This appendix describes the maximum usable Advanced Copy size.
The maximum copy source capacity for each copy type is shown in the table below.
The estimated values in the following tables are examples of typical Advanced Copy sessions (the maximum
memory area required for Advanced Copy management is secured and the number of copy sessions is 400).
Actual values can be calculated by using the procedure in "How to calculate the copy table size" of "Modify
Copy Table Size" in "ETERNUS Web GUI User's Guide (Settings)".
When performing EC/REC (*1) and OPC/QuickOPC/SnapOPC/SnapOPC+ without OPC Restoration
(Unit: GB (TB))
(Using 1TB=1,024GB Decimals rounded off at the second place)
*1: REC is available for the ETERNUS DX200 S3/DX500 S3/DX600 S3 and the ETERNUS DX200F.
Model
Resolution
× 1 × 2 × 4 × 8 × 16 × 32 × 64
ETERNUS DX100 S3/
DX200 S3
ETERNUS DX200F
(Table size = 512MB)
32568
(31.8)
65136
(63.6)
130272
(127.2)
260544
(254.4)
521088
(508.8)
1042176
(1017.7)
2084352
(2035.5)
ETERNUS DX500 S3
(Table size = 1024MB
(1GB))
65336
(63.8)
130672
(127.6)
261344
(255.2)
522688
(510.4)
1045376
(1020.8)
2090752
(2041.7)
4181504
(4083.5)
ETERNUS DX600 S3
(Table size = 4096MB
(4GB))
261944
(255.8)
523888
(511.6)
1047776
(1023.2)
2095552
(2046.4)
4191104
(4092.9)
8382.208
(8185.8)
16764.416
(16371.5)