Fujitsu Eternus DX600 S3 - Page 125

Appendix B Structures for Host Connection
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
125
• CA port group settings (Refer to "Create FC Port Group", "Create iSCSI Port Group", "Create SAS Port Group", or
"Create FCoE Port Group" in "ETERNUS Web GUI User's Guide (Settings)" for details).
Port#0: CM#0 CA#0 Port#0
Port#1: CM#1 CA#0 Port#0
Port#2: CM#0 CA#0 Port#1
Port#3: CM#1 CA#0 Port#1
• LUN group settings (Refer to "Add LUN Group" in "ETERNUS Web GUI User's Guide (Settings)" for details).
• Host affinity settings (Refer to "Create Host Affinity" in "ETERNUS Web GUI User's Guide (Settings)" for
details).
*1: Setting example when specifying a host group that accesses LUN group YY via CA port group Y.
*2: Setting example when a host group that accesses LUN group YY via CA port group Y is not specified.
No. CA port group Port
1 CA Port Group X Port#0, Port#1
2 CA Port Group Y Port#2, Port#3
No. LUN group Host LUN LUN
1LUN Group XX 0 Vol#1
1Vol#2
2Vol#3
2 LUN Group YY 0 Vol#10
1 Vol#11
No. Host group CA port group LUN group Description
1 Host Group A
(Default)
CA Port Group X LUN Group XX A host affinity with the affinity mode
set to "ON".
2 Host Group B
(Default)
CA Port Group X LUN Group XX A host affinity with the affinity mode
set to "ON".
3
(*1)
Host Group C
(Default)
CA Port Group Y LUN Group YY A host affinity with the affinity mode
set to "ON".
4
(*2)
All
(Default)
CA Port Group Y LUN Group YY A host affinity with the affinity mode
set to "OFF".
• In setting example No.4, LUN groups other than "LUN group YY" cannot be allocated to the "CA port
group Y".
• In setting example No.4, the "CA port group Y" for which "All" is selected cannot be used for setting
host affinity with the specified host group (setting examples No.3 and No.4 cannot be configured in
the same environment).