Chapter 3 Initial Setup
3.1 Initial Setup 1
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
34
9 Click the [Close] button.
The browser is closed, and Initial Setup 1 is complete.
• Follow the on-screen instructions to reboot the ETERNUS DX if needed.
• Restart the browser, and wait a few minutes before logging into the GUI again. After logging in
again, continue with the initial setup. Proceed to Initial Setup 2.
To Next Page
Loading...
