Fujitsu Eternus DX600 S3 - Page 80

Chapter 5 Host Interface Management
5.2 Modify Port Parameters
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
80
■ When the port mode is "CA/RA"
When the type is "1G iSCSI" or "10G iSCSI" and the port mode is "CA/RA", specify the following items:
The main setting items are as follows.
● Select Port
• Port
● General Information
• iSCSI Settings
- iSCSI Name
- Alias Name
• TCP/IP Settings
- IP Version
- IP Address
- Subnet Mask
- Gateway
- IPv6 Link Local Address
- IPv6 Connect IP Address
- IPv6 Gateway
- TCP Port No.
- TCP Window Scale
- VLAN ID
- MTU