Chapter 5 Host Interface Management
5.6 Create Host Affinity
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
98
5 Select a CA port group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
6 Click the [Browse...] button for the LUN group.
The [Select LUN Group] screen appears.
• If a specific host group has been selected in the "Host Group" field, CA ports for which the affinity
mode is "OFF" are not displayed.
• If "All" has been selected in the "Host Group" field, CA ports with any of the following conditions are
not displayed:
- The affinity mode is "ON"
- The CA port is used in the CA port group
- The CA port group is used by another host affinity
To Next Page
Loading...
