Fujitsu Eternus DX80 S2 - Connect FST to DX80 S2; DX90 S2

Connect FST to DX80 S2 / DX90 S2
 DX80 S2 and DX90 S2 systems have one MNT LAN port per
CM
 The MNT port is shared for both the Field Engineer and customer
administration tasks
 Connect the LAN cable of the Field Service Terminal (FST) to the port
labeled "MNT" at the Controller Module
• The "Master LED" of the respective CM lights in green
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
MNT Port
Master LED
2