Fujitsu Eternus DX80 S2 - Initial Configuration of the FST

Initial Configuration of the FST
 Connect the FST to the Master CM of the ETERNUS DX S2
system
 The default IP address of the ETERNUS Manager GUI
• http://192.168.1.1/
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
Web browser
Internet Explorer 7.0/8.0 or later
Mozilla Firefox 3.6.x or later
LAN cable Straight cable or cross-linked cable (direct connection)
IP Address/Subnet mask
ETERNUS DX S2 Entry: MNT
ETERNUS DX S2 Midrange: FST
Factory default IP Address: 192.168.1.1
Factory Subnet mask: 255.255.255.0
IP address of the FST
Select it within the same subnet of IP Address that is used for
the ETERNUS LAN Port (For example 192.168.1.20)
Caution
Do not use a proxy server or cache (Temporary Internet Files)
JavaScript and Style Sheet must be enabled for the browser
4