Fujitsu Eternus DX80 S2 - Connect FST to DX400 S2

Connect FST to DX400 S2
 DX400 S2 systems support a specific FST LAN port per CM
 Connect the LAN cable of the Field Service Terminal (FST) to the port
labeled "FST" at the Controller Module
• The "Master LED" of the respective CM lights in green
 Separate LAN port labeled "MNT" at each CM can be
connected to the customer LAN
 Both ports can be used for Field Engineer as well as for customer
administration tasks
Copyright Fujitsu Technology Solutions, Release August 2011
Initial Setup ETERNUS DX80 S2, DX90 S2, DX410 S2 and DX440 S2
FST Port
Master LED
MNT Port
3