Fujitsu Eternus DX80 S2 - Default Chapter; Table of Contents

Table of Contents
Chapter 1 Workflow 6
Chapter 2 Setting Up the ETERNUS DX 8
2.1 Common Settings ........................................................................................................................... 8
2.1.1 Setting the To-server Connection Type (Setting the FC Port Parameters) ..............................................................8
2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups).................................................................10
2.1.3 Setting the Host Responses ................................................................................................................................10
2.1.4 Setting the Host Response for the ETERNUS DX8000 S2 series using the ETERNUS Multipath Driver...................11
2.1.5 Setting the CA Port Groups..................................................................................................................................11
2.1.6 Registering the WWNs of the Accessing Fibre Channel Cards (Setting FC Host)...................................................11
2.1.7 Allocating LUN Groups (Setting the Host Affinity)...............................................................................................12
2.2 Specific Settings ........................................................................................................................... 12
2.2.1 Setting the CA Reset Groups................................................................................................................................12
2.2.2 Setting the Subsystem Parameters .....................................................................................................................12
2.3 Checking the WWNs ..................................................................................................................... 13
4
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-5332-15ENZ0