Fujitsu Eternus DX80 S2 - Chapter 1 Overview; Accessing the ETERNUS CLI

Power On Procedure (3)
 Drive Enclosure LEDs
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
LINE LED
 AC power is supplied to the Drive Enclosure
FAULT LED
 Constant amber when a failure is detected
in the Drive Enclosure
POWER LED
 The Drive Enclosure is operating normally
DE-ID (7-segment)
 Shows a 2-digit Drive Enclosure ID
 Is assigned automatically by the SAS
backend cabling
2.5" Drive Ecnlosure
3.5" Drive Ecnlosure
17