Fujitsu Eternus DX80 S2

To Next Page

To Previous Page

M5 Centering

screws (10 mm)

2U Bracket

Rack Mounting (2)

 Attach the 2U Bracket to the right rear

rack pillar

 The M5 centering screws should be

inserted in the 1st and 6th holes

above the base line of the

Enclosures

 Insert the pins of the left hand

side slide rail in the 1st and

3rd hole

 Start counting from the bottom

of the 2U Bracket

Hardware Installation ETERNUS DX80 S2 and DX90 S2

Base line of the

Controller Enclosure

Fujitsu Eternus DX80 S2 - Page 6