Fujitsu Eternus DX80 S2 - Page 7

M5 Cage nut
Rack Mounting (3)
 Push the M5 cage nut into the
2nd hole of the front rack pillar
 Above the base line of the Enclosures
 At the left hand side fix the slide
rail to the front pillar with
 The M5 centering screws
 The M5 pan head screws
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
M5 Centering
screw (10 mm)
M5 Pan head
screw (10 mm)
Base line of the
Controller Enclosure
6