Fujitsu Eternus DX80 S2 - Page 8

Rack Mounting (4)
 For the left hand side rail
 Insert the pins in the holes of the rear pillar
 Fix the other side of the slide rail to the front pillar
• Repeat the same procedure as done before with the left hand side slide rail
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
Base line of the
Controller Enclosure
M5 Cage nut
Base line of the
Controller Enclosure
M5 Pan head
screw (10 mm)
M5 Centering
screw (10 mm)
7