Fujitsu Eternus DX90 S2 - Table 4.7 Priority Order of 3.5 Drive Installation

Chapter 4 Rack and Optional Product Installation
4.3 Standard Installation Rules Before Shipment (Only for Regions Other than EMEA&I)
ETERNUS DX80 S2/DX90 S2 Disk storage system User’s Guide -Site Planning-
Copyright 2013 FUJITSU LIMITED P3AM-4822-12ENZ0
75
■ 3.5" drives
The following table shows the priority order of 3.5" drive installation.
Table 4.7 Priority order of 3.5" drive installation
Priority order Type Drive capacity/quantity RAID level
1
SSD (3.5inch)
100GB (SLC) x 2 RAID1
2 100GB (SLC) x 6 RAID1+0
3 100GB (SLC)x 4 RAID5
4 100GB (SLC) x 1 Hot spare
5 200GB (SLC) x 2 RAID1
6 200GB (SLC) x 6 RAID1+0
7 200GB (SLC) x 4 RAID5
8 200GB (SLC) x 1 Hot spare
9 400GB (SLC) x 2 RAID1
10 400GB (SLC) x 6 RAID1+0
11 400GB (SLC) x 4 RAID5
12 400GB (SLC) x 1 Hot spare
13 400GB (MLC) x 6 RAID1+0
14 400GB (MLC) x 4 RAID5
15 400GB (MLC) x 1 Hot spare
16 800GB (MLC) x 2 RAID1
17 800GB (MLC) x 6 RAID1+0
18 800GB (MLC) x 4 RAID5
19 800GB (MLC) x 1 Hot spare
20
Disk Drive (3.5inch)
300GB/15krpm x 2 RAID1
21 300GB/15krpm x 6 RAID1+0
22 300GB/15krpm x 6 RAID5
23 300GB/15krpm x 6 RAID6
24 300GB/15krpm x 1 Hot spare
25 450GB/15krpm x 2 RAID1
26 450GB/15krpm x 6 RAID1+0
27 450GB/15krpm x 6 RAID5
28 450GB/15krpm x 6 RAID6
29 450GB/15krpm x 1 Hot spare