EasyManua.ls Logo

Fujitsu Eternus DX90 - Page 116

Fujitsu Eternus DX90
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
outDirName
Specify the directory that outputs performance information.
Performance information is output to the
outDirName
directory based on the following configuration.
The following free space (unit: MB) is required for this directory.
(((0.1 + 0.4 * installed DEs + 0.1 * installed CM ports + 0.2 * (LUs + RAID groups)) * 1440)
+ (0.2 + 0.6 * installed DEs + 0.2 * installed CM ports + 0.4 * (LUs + RAID groups))) / 1024
OPTIONS
-ipaddr
ipAddr
This option specifies the IP address of the device that outputs performance information.
The output target device must satisfy the following conditions:
- Storage devices output performance information must be registered in this software.
Refer to "Performance management" for the settings of performance monitoring.
-recent 24
This option collects the latest 24-hour performance data.
If this option is skipped, the latest 1-hour performance data is collected.
- 102 -

Table of Contents

Other manuals for Fujitsu Eternus DX90

Related product manuals