Fujitsu Eternus DX90 - Changing Expresss Manager Environment (Windows); Changing Port Numbers (Windows)

Copy Source File Copy Destination Directory
$BAK_DIR\CCM\etc\db\eternus.xml $ENV_DIR\CCM\etc\db
$BAK_DIR\CCM\var\micc\database\DeviceRegList.xml $TMP_DIR\CCM\var\micc\database
If the following source files exist, copy them to the destination directory.
Copy Source File Copy Destination Directory
$BAK_DIR\CCM\etc\prop\user.properties $ENV_DIR\CCM\etc\prop
$BAK_DIR\CCM\etc\stxc.alias $ENV_DIR\CCM\etc
$BAK_DIR\CCM\etc\stxc_ext.alias
$BAK_DIR\CCM\etc\stxcvolinf
Copy the subdirectories and files in the following source directory to the destination directory.
Copy Source Directory Copy Destination Directory
$BAK_DIR\CCM\etc\db\cg $ENV_DIR\CCM\etc\db\cg
9. Restore the license management database.
If the license management database is not backed up (in case of upgrading from a previous version), this step is unnecessary.
Execute the following command. The
fileName is the file name specified when the backup data was created.
$INS_DIR\LM\bin\esflm restore $BAK_DIR\LM\fileName
10. Execute the following batch to start the ETERNUS SF Manager services.
$INS_DIR\Common\bin\Start_ESFservice.bat
5.1.3 Changing Express's Manager Environment (Windows)
This section describes the following procedure.
- How to change the port numbers used in Express or Web Console
- How to change the IP address of the Management Server
5.1.3.1 Changing Port Numbers (Windows)
Changing Port Numbers Used in Express
This section describes how to change port number that is used by Express.
The port numbers are defined in the operating system's services file. The ports shown in the following table are used by Express. The
default values for the port numbers are shown. If you have changed the value for these port numbers, please read the numbers to
replace after the change in this section.
Port Number Service Name Protocol Note
9855 esfmanagerweb tcp Port number used for the Web Console
1226 stgxfws tcp Port number used for configuration management and polling monitoring
24916 sscruiserm tcp Port numbers used inside Express
Information
Notation in Procedure:
- 77 -