EasyManua.ls Logo

Fujitsu Eternus DX90 - Capacity Graph Window Types; NAS Management; Overview of Functions; About NAS Management

Fujitsu Eternus DX90
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Information
The information of the Thin Provisioning Capacity and its capacity used is displaying in graph. The information is obtained everyday
at 1:00:00.
You can change the time to obtain the information by using a polling service setting file. Refer to "Polling Service Setting File" in the
ETERNUS SF Storage Cruiser Operation Guide
for details.
4.5.2.1 Capacity Graph Window Types
It is possible to display the following graph.
One-month Graph window
The line graph displays data for the past 31 days from the present day.
The plot points are displayed on a daily basis.
4.6 NAS Management
This product will manage ETERNUS Disk storage system models that are multi-protocol storage with a block access interface (SAN)
and a file access interface (NAS). With the Web Console, various features for operation of the ETERNUS Disk storage system NAS file
system can be utilized.
This section explains the following items necessary in order to perform NAS operation of the ETERNUS Disk storage system with this
product.
- Overview of Functions
- Required Setup Configuration
- Installation Steps
- Operation Method
Note
- This function cannot be used for ETERNUS DX200F.
- Refer to the ETERNUS Disk storage system manuals for notes of NAS operation.
4.6.1 Overview of Functions
4.6.1.1 About NAS Management
NAS management of the ETERNUS Disk storage system will be explained.
4.6.1.1.1 Basic System Configuration
Basic system configurations required when operating NAS of the ETERNUS Disk storage system will be explained.
- 30 -

Table of Contents

Other manuals for Fujitsu Eternus DX90

Related product manuals